• We've just upgraded this forum to a major new version. It looks slightly different and has different menu options.

    Please let me know if there are any issues you encounter with this upgrade, I'm still getting my head round it! Tolerance and a bit of time would be most appreciated.

    Thanks Neil

Wanted Snuffer for M336 cruising chute

Richard Readings

Richard Readings
Boat name
EMMIE
Berth
Parkstone Yacht Club
Boat type
Moody 336
Cruising area
English Channel
#1
Does anyone have a snuffer that would be suitable for our M336 cruising chute that they no longer need?

Richard
 

Gareth Dop

Gareth Dop
Boat name
ATHENA OF SALCOMBE
Berth
Poole
Boat type
Moody 42
Cruising area
Channel
#2
Hi Richard

There is one on e bay that might fit. Located on IoW.

Kindest


Gareth
 

Richard Readings

Richard Readings
Boat name
EMMIE
Berth
Parkstone Yacht Club
Boat type
Moody 336
Cruising area
English Channel
#4
Thx Gareth, I'd seen that one but fear it's about 3ft too short for a 336.
Turns out it was too long, luff length of Emmie's cruising chute is 10.8m. Although it could be shortened total cost would have been close to that of a new one!

- Richard
 

Chris Johnson

Chris Johnson
Boat name
JALIBU
Berth
Tidemill YH, Woodbridge
Boat type
Moody 336
Cruising area
East Coast
#5
Richard, I have a snuffer that is surplus to requirements, not sure of length, I’m going to the boat this weekend and could measure, what length are you looking for.
Cheers Chris Johnson
 

Richard Readings

Richard Readings
Boat name
EMMIE
Berth
Parkstone Yacht Club
Boat type
Moody 336
Cruising area
English Channel
#6
Richard, I have a snuffer that is surplus to requirements, not sure of length, I’m going to the boat this weekend and could measure, what length are you looking for.
Cheers Chris Johnson
The luff length of Emmie's cruising chute is 10.8m, so I guess that's what we'd be looking for.

Richard
 

Chris Johnson

Chris Johnson
Boat name
JALIBU
Berth
Tidemill YH, Woodbridge
Boat type
Moody 336
Cruising area
East Coast
#7
Hi Richard, snuffer length exactly 10.8 m from very tip of sock to opening of snuffer. The asymmetric attaches to a wire strop approximately 15 cm below tip of sock.
Some phots attached.
Best regards Chris
A1F5EC55-C077-4401-9F67-23EEE02C06F7.jpeg
C9EF6831-FCC6-454D-B329-8C5AE9AE4540.jpeg
2ABDFDEA-58A8-4DDD-987A-325A9612265D.jpeg
…'v,m
 

Richard Readings

Richard Readings
Boat name
EMMIE
Berth
Parkstone Yacht Club
Boat type
Moody 336
Cruising area
English Channel
#8
Hi Richard, snuffer length exactly 10.8 m from very tip of sock to opening of snuffer. The asymmetric attaches to a wire strop approximately 15 cm below tip of sock
Sounds good, I'll PM you.

Richard
 

Chris Johnson

Chris Johnson
Boat name
JALIBU
Berth
Tidemill YH, Woodbridge
Boat type
Moody 336
Cruising area
East Coast
#9
Hi Richard, have been on the high seas so sorry if you have been trying to make contact. Are you still interested in the snuffer.
Regards Chris
 

Richard Readings

Richard Readings
Boat name
EMMIE
Berth
Parkstone Yacht Club
Boat type
Moody 336
Cruising area
English Channel
#10
Hi Richard, have been on the high seas so sorry if you have been trying to make contact. Are you still interested in the snuffer.
Regards Chris
Chris, I've sent you a PM...

Richard
 

Chris Johnson

Chris Johnson
Boat name
JALIBU
Berth
Tidemill YH, Woodbridge
Boat type
Moody 336
Cruising area
East Coast
#11
Hi Richard, not sure what PM is, haven't received any communications other than through this thread.
Best regards Chris
 
Top